Technical Information; Guarantee - Electrolux GA60GLVXCN Benutzerinformation

20 www.electrolux.com
12.1 The washing and drying results are not satisfactory
Problem
There are whitish streaks or
bluish layers on glasses and
dishes.
There are stains and dry wa-
ter drops on glasses and
dishes.
The dishes are wet.
Refer to "Hints and tips" for
other possible causes.

13. TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
Power consumption
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy),
use the hot water supply to decrease energy consumption.
14.

GUARANTEE

CH
Customer Service Centres
1)
Industriestrasse 10
5506 Mägenwil
Possible solution
• The release quantity of rinse aid is too much. Adjust
the rinse aid selector to a lower position.
• The quantity of detergent is too much.
• The released quantity of rinse aid is not sufficient.
Adjust the rinse aid selector to a higher position.
• The quality of the rinse aid can be the cause.
• The programme does not have a drying phase or
has a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try
a different brand or activate the rinse aid dispenser
and use rinse aid and multi-tablets together.
Width / height / depth (mm)
Voltage (V)
Frequency (Hz)
bar (minimum and maximum)
MPa (minimum and maximum)
Cold water or hot water
Place settings
Left-on mode (W)
Off-mode (W)
Point of Service
Le Trési 6
1028 Préverenges
596 / 818-898 / 550
220 - 240
50
0.5 - 8
0.05 - 0.8
max 60 °C
2)
15
0.99
0.10
Via Violino 11
6928 Manno