Shutting Down; Technical Specifications - Kärcher HDR 777 Anleitung

Operation
Switch-off in case of emergency
Turn the main switch to position "0"
Operation
The operating type (recycling or inlet into
the drainage system) must be set by the
Customer Service mechanic at the time of
start-up.
The plant can be operated in 5 versions:
1 Operate with connection to the drainage
system
2 Recycling operations with high-pressure
cleaner
3 Recycling operations with high-pressure
cleaner and inlet into the drainage system
4 Recycling operations with buffer tank at the
end
5 Recycling operations with buffer tank at the
end and inlet into the drainage system
All 5 operation modes need different instal-
lations, see "Plant installation".
Turn the main switch to position "1"

Shutting down

Turn the main switch to position "0"
Water must be drained out of the sys-
tem by opening the drain cock if the
plant is to remain idle for a longer time
or if there are frost conditions.
Storage
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Transport
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Technical specifications

Nominal voltage
Frequency
Power
Depth
Width
Height
Weight, empty
Weight, full
Sound pressure level L
pA
Uncertainty K
pA
Max. throughput; liquid
splitting agent
Max. throughput; splitting
powder
Contents of storage tank l
Consumption of liquid
splitting agent
Consumption of splitting
powder
Consumption of sterilisa-
tion agent
4
-
EN
Maintenance and care
Only a well-maintained plant is safe. En-
sure that you carry out regular mainte-
nance tasks according to the following
maintenance plan.
Danger
– Risk of accident due to improper main-
tenance! Service and repairs may only
be carried out by authorised persons or
Kärcher Customer Service.
– Risk of injury! Never intervene in the re-
action tank when the plant has been
switched on or the stirrer is on.
Danger
Risk of electric shock.
– Before starting any work on the plant,
switch off the main switch and pull out
the plug.
– Switch off both the devices in case of
recycling operations with high-pressure
cleaner.
– The switching cabinet may only be
V 230/1~
opened when the plant has been
Hz 50
switched off and separated from the
kW 1,2
power supply.
mm 630
Use exclusively original parts of the manu-
facturer or those parts recommended by
mm 1300
him. Observe all instructions on safety and
mm 1300
use which are accompanying these parts.
kg 165
This concerns:
kg 485
– replacement and wear parts
dB(A) < 60
– Accessory parts
dB(A) 1
– Fuel
l/h 800
l/h 600
250
ml/m ap-
3
prox.
225
kg/m ap-
3
prox. 1
ml/m ap-
3
prox.
100
15