General Safety Instructions; Intended Use; Technical Data - SCHUNK KSC-D 125 Montage- Und Betriebsanleitung

_________________________________________________________________________________________
2

General safety instructions

2.1 Intended use

The clamping device may only be used in accordance with the technical data and has been
designed for stationary application on milling machines in an industrial environment.
Using the device in accordance with the intended purpose includes compliance with the
commissioning, installation and operating instructions, and with the environmental and
service conditions as provided by the manufacturer.
The manufacturer accepts no liability for damage resulting from non-intended use.

2.1.1 Technical data

Version
KSC-D 125
Clamping torque / clamping force
Exposure to loads in excess of the max. clamping torque results in damage to the spindle.
Weight:
KSC-D 125-320
KSC-D 125-390
KSC-D 125-460
KSC-D 125-530
KSC-D 125-600
KSC-D 125-670
KSC-D 125-740
For further data, please see the current catalogue >> Schunk stationary Workholding <<
schunk.com
max. torque max. clamping force
100 Nm
Standard without jaws:
Standard without jaws:
Standard without jaws:
Standard without jaws:
Standard without jaws:
Standard without jaws:
Standard without jaws:
XND.00033.002_A – 10/2018
40 kN
14.0 kg
17.0 kg
20.0 kg
24.0 kg
27.0 kg
30.0 kg
34.0 kg
24