Herunterladen Inhalt Inhalt Diese Seite drucken

Compatible Shocks; Shock Maintenance; Shock Setup - Propain Rage Bedienungsanleitung

Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

13
Air shocks: Release all the air from the shock to compress it all the
way and check for any points of contact between the frame and the
shock. If there are any levers on the shock, please also check them
in every position for points of contact. If there is no contact between
shock and frame, it can be used without any doubt.
Coil shocks: To check the compatibility of shocks using a steel
spring (coil), remove the spring from the shock, but leave the disk
that supports the spring in the shock. Now you can compress the
shock as well and check for any points of contact moving the disk
up and down the piston rod. Also check for any contact points ad-
justment levers on the shocks could cause.

Compatible shocks

There are no restrictions on shocks that are approved to be used
with the Rage model. Air and Coil shocks are equally approved to
be used. Nevertheless, you still must perform a test of compatibility
because changes of the shock by the manufacturer are possible
anytime.

Shock maintenance

Permanent excellent performance of the shock can only be guaran-
teed if it is serviced periodically. To ensure that you should keep a
few things in mind:
Clean the running surface of the shock after every ride, especially
in extremely dusty or muddy conditions. Lubricate the seal at the
piston rod according to the manufacturer's instructions.
Depending on the conditions but not less than every year, Propain
recommends doing a shock service at the manufacturer.
Not less than twice per year you should do an air can service with
your air shock. This can be done at either a bike dealer in your re-
gion or at the manufacturer of the shock.
If you are uncertain in any of the points mentioned above, please
do not hesitate contacting Propain or your local bike dealer.

Shock setup

Your shock needs to be set up correctly to ensure your bike per-
forms well. Wrongly set up shocks can cause damages to the frame
or its spare parts. Furthermore, it can cause crashes and in the
worst case severe injuries.

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis