Additional Functions To The As-I Profile; Approval Of Radio Equipment; Ec Declaration Of Conformity; Maintenance, Repair, Disposal - IFM Electronic efector 190 DTA100 Betriebsanleitung

/
READ WRITE HEAD FOR RF IDENTICFICATION SYSTEMS
Coded value representation using the data bits D16...D1
The ID value is represented as a signed 16-bit number.
Range
Value range
Message range
Value 0 = no ID tag in the reading range or ID tag not detected.

8. Additional functions to the AS-i profile 7.4

Read ID string
Reading of AS-i slave information
Read diagnosis string
Reading of statistics of read/write operations
Read parameter string
(not implemented)
Write parameter string
Writing of data to the transponder
You can find the manual with details about the AS-i services to the profile 7.4 on
our website at:
www.ifm-electronic.com

9. Approval of radio equipment

Marking to R & TTE (Radio and Telecommunications Terminal Equipment)
CE identification number: CE 0682
Intended use: use in all EU countries

10. EC Declaration of Conformity

You can find the EC declaration of conformity on our website at:
www.ifm-electronic.com

11. Maintenance, repair, disposal

In case of correct use no maintenance and repair measures are necessary. Only the
manufacturer is allowed to repair the unit.
After use dispose of the unit in an environmentally friendly way in accordance
with the applicable national regulations.
16
Decimal
from
0
-1
Data sheet direct
Data sheet direct
DTA100
to
32767
-32768
DTA100 Additional Data
DTA100 Additional Data
Hex
from to
0 7FFF
FFFF 8000