Alignment Of The Sensing Face; Electrical Connection; Operation - IFM Electronic efector 100 Montageanleitung

Alignment of the sensing face

Electrical connection

Disconnect power before connecting the sensor.
Note: insert a miniature fuse according to the technical data sheet, if
specified.
Recommendation: check the unit for reliable function after a short
cirucit.

Operation

Check the safe functioning of the sensor.
• The green LED is lit when the supply voltage is applied.
• The red (yellow) LED is lit when the output is switched.
The operation of the sensor is maintenance-free. For perfect
functioning make sure that:
• the sensing face and the open space are kept free of metal deposits
and foreign bodies, particularly for installation with the sensing face
facing upwards;
• Units with high field intensity (e. g. walkie-talkies) are not used at
close range to the sensor.
UK
5 5