Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instructions for Use
The appliance can be operated either by the switches located on the bottom of the fire-
place heater or by the supplied remote control.
First of all, turn on the power switch on the right. The indicator light will be red.
Manual Operation
•
Press the POWER button once to turn on the appliance and the fire effect. A red
indicator light will appear to indicate that the function is ON.
•
Press the
and embers. Press several times to go through the different settings.
•
Press the
to switch off the heat setting.
•
Press the
again to switch off the heat setting.
Remote Operation
•
It takes some time for the receiver to respond to the
transmitter.
Do not PRESS the buttons more than once within two seconds
for correct operation.
•
Press the POWER button once to turn on the appliance and the
fire effect. A red indicator light will appear to indicate that the
function is ON.
button to choose a brighter or dimmer setting for the flame display
I
HEATING
button (900W) once for the low heat setting; press again
II
HEATING
button (1800W) once for the high heat setting; press
Werbung
