Transport, Packaging And Storage; Commissioning, Operation; Mounting Preparation - WIKA ELS Betriebsanleitung

4. Transport ... / 5. Commissioning, operation

4. Transport, packaging and storage

4.1 Transport
Check the float switch with external chamber for any damage that may
have been caused by transport. Obvious damage must be reported
immediately.
CAUTION!
With improper transport, a high level of damage to property
can occur.
▶
Observe the symbols on the packaging.
▶
Handle packed goods with care.
4.2 Packaging and storage
Do not remove packaging until just before commissioning.
Keep the packaging as it will provide optimum protection during
transport (e.g. change in installation site, sending for repair).

5. Commissioning, operation

Observe all instructions given on the shipment packaging for
■
removing the transportation safety devices.
Remove the float switch carefully from the packaging!
■
When unpacking, check all components for any external damage.
■

5.1 Mounting preparation

Functional check
Before mounting, the float switch with external chamber can
be connected as described in chapter 5.3 and the switch
points can be operated manually. For manual operation of
the switch points, the external chamber must be carefully
removed. After the functional check, remount the external
chamber and return it to its 'as delivered' condition.
Operating instructions float switch, model ELS
EN
11