Herunterladen Inhalt Inhalt Diese Seite drucken

Before Using The Appliance The First Time; Operation - Unold 8250 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für 8250:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
29. Do not use the appliance with
accessories of other manufactur-
ers or brands, to prevent damage.
30. Unplug the appliance from the
power supply after use and prior
to cleaning. Never leave the
appliance unattended when it is
plugged in to the power supply.
31. Check the appliance, the plug and
the power cord regularly for wear
or damage. In case of damage
to the power cord or other parts,
CAUTION:
Do not open the lid while the water is boiling.
If the kettle jug is filled beyond its maximum capacity, boiling water can
splash out. The appliance becomes very hot during operation and maintains
the heat during some time after disconnection.
Never open the housing of the appliance. This can result in electric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

BEFORE USING THE APPLIANCE THE FIRST TIME

1.
Remove all packaging materials
and any transport safety devices.
2.
Clean all parts with a damp
cloth, as described in the chapter
"Cleaning and care".
3.
Check to make sure that the appli-
ance is stable.
4.
Connect the base via the power
cord to the power supply (230 V~,
50 Hz).
5.
Remove the kettle from the base.
6.
Press the opening key to the back,
the lid is opening.
7.
Add clear, cold water to the "Max"
marking.

OPERATION

1.
Remove the kettle from the base.
2.
Press the opening key to the back,
the lid is opening.
3.
Fill
the
(minimum 0.5 litres, mark MIN,
maximum 1.8 litres, mark MAX).
kettle
with
water
please send the appliance or the
base for inspection and repair to
our after sales service.
32. Unauthorized repairs can result in
serious risks to the user and void
the warranty.
33. If the supply cord is damaged, it
must be replaced by the manufac-
turer or its service agent or a simi-
larly qualified person in order to
avoid a hazard.
8.
Close the lid by pressing lightly.
9.
Place the kettle level on the base.
10. Switch on the kettle by pressing
the ON/OFF switch downwards
into the „I"-position. The kettle
cannot be switched on if it is not
properly seated on the base.
11. When the water boils, the appli-
ance automatically shuts off.
12. For hygienic reasons, please dis-
card the water from the first boi-
ling.
4.
CAUTION!
If the kettle is overfilled, boiling
water may be ejected!
15

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis