Multiple Handsets; Internal Calls - switel DE11 Bedienungsanleitung

11

Multiple Handsets

Up to five handsets can be registered on the base station. Each handset can be registe-
red on up to four base stations simultaneously.
The standardised GAP Standard enables SWITEL handsets and even those
from other manufacturers to be integrated in the telephone system. In the
same way, a SWITEL handset can be registered on base stations from other
manufacturers as long as it, too, complies with the GAP Standard.
The use of multiple handsets provides the following options:
S
Internal calls between the handsets (intercom).
S
External calls can be transferred between the handsets.
S
Incoming external calls are received on all handsets.
S
Conference calls between two handset users and one external caller.
If one of the other handsets is currently using the outside line, the E icon
appears in the display. It is not possible to make another external call.
11.1

Internal calls

As soon as more than one handset (subsequently abbreviated to: HS) has been registe-
red on the base station, they can be used for internal calls.
Following example: HS 1 (internal HS no. 1) calls HS 2 (internal HS no. 2).
I ë 2
ƒ
If an external call is received during an internal call, short acoustic signals are
issued and the caller's number appears in the display, if available.
ƒ
ƒ
11.2 Transferring external calls internally
If you have taken an external call on a handset, the call can be transferred to another in-
ternal handset.
Ië 2
If the handset called does not answer, take the call back by pressing the I
button.
After the internal call has been taken by the handset called, the following options are avai-
lable:
11.2.1 Holding a call / Brokering
You can talk to the party using the other handset and then return to the external caller by
pressing the I button. You can switch between the external and internal parties as
often as necessary.
11.2.2 Transferring a call
By pressing the ƒ button on the first handset, the external call is transferred to the
handset called.
104
− Multiple Handsets −
HS 1: Connection is established to other handset
HS 2: Takes the call
Ends the internal call
Takes the incoming external call
HS 1: Connection is established to other handset