Herunterladen Inhalt Inhalt Diese Seite drucken

Reprogram Request; One Touch Button Functions; Out Of Range; Secure Operation - Motorola MCS 2000 II Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

English
MCS 2000 Models II & III
pressing the PTT (F) or pressing and releasing the
monitor button (2).
Status/Message
Operated as previously described under "Conven-
tional Functions".

Reprogram Request

If dynamic regrouping is programmed into your radio,
the reprogram request function may be selected either
via a pre-programmed button or through a menu. A
reprogram request will send a message to the console
operator requesting that the operator assign the radio
to a new talkgroup. See your system administrator for
further details.

One Touch Button Functions

If this optional feature is programmed in your radio, a
button may be dedicated to sending a pre-pro-
grammed status, message, call alert or dialing a pre-
programmed phone number. See your system admin-
istrator for further details.

Out of Range

If this optional function is programmed into your radio,
it will indicate when you have left your radio coverage
area. The display will alternate between
model III
OUT OF RANGE
SOUTH DIVISION
and the current mode and/or the out of range tone will
sound.

Secure Operation

Note: This section applies only if secure operation is
programmed into your radio. This section lists fea-
tures where differences occur when operating in
secure. For other feature operation see General
Operation above.
Outgoing Calls: When the selected mode is not pre-
programmed as either secure-only or clear-only,
secure transmit is turned on/off by pressing the
secure button (4), except for trunking telephone inter-
connect and private call which are always controlled
by the button. A beep immediately after the PTT is
pressed indicates a clear (non-secure) transmission.
Note: If the secure button is pressed during a trans-
mission, the transmission is aborted, and an alert tone
will sound until the PTT is released. The operation
change will be effective with the next PTT press.
Incoming Calls: When a secure call is received the
orange LED (conventional only) and the secure icon
will flash.
page 16
68P81083C10-C
model II
OUT OF RANGE

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mcs 2000 iii

Inhaltsverzeichnis