Smartzone/Amss Functions; Site Search & Site Lock; Emergency Operation - Motorola MCS 2000 II Bedienungsanleitung

no user actions occur during a pre-programmed
length of time. A user action is defined as the press of
a button, turn of a knob or the use of any radio acces-
sory (e.g. footswitch).
2 minutes prior to automatic power-off, the radio will
generate a continuous low tone and
AUTO POWER OFF
will flash on the display. Any user action will immedi-
ately cause the radio to cease the automatic power-
off tones and display and return the radio to normal
operation.

SmartZone/AMSS Functions

In SmartZone and AMSS (Automatic Multiple Site
Select) operation the two functions mentioned below
may be programmed into your radio:
Site Search & Site Lock
Press the site search/monitor button (2) to show the
current site and signal strength.
Additionally a bar display is used to reflect the signal
strength level for the current site ranging from 0 to 3
bars:
MCS 2000 Models II & III
English
3 bars indicate a very strong signal and
no bar indicates a very weak signal.
Press and hold the site search button (2) to force the
radio to scan for a new site.
If the optional "wide-area roaming" function is pro-
grammed the radio will automatically switch sites as it
moves through your coverage area.
Automatic site switching may be disabled by activat-
ing the site lock function.
Please contact the person in charge of your radio sys-
tem for further information.

Emergency Operation

If emergency is enabled on your system the function is
invoked by pressing the emergency button (5).
Emergency is exited by pressing the emergency but-
ton for approximately 2 seconds.
Trunking only:
Your radio may be programmed to indicate that an
emergency call has been received from another mem-
ber of your talkgroup. The display will then alternate
between
68P81083C10-C
page 11