Connecting The Power Supply - Medion MD 30159 Bedienungsanleitung

• Ensure that the TFT monitor is not yet plugged in and neither the TFT monitor nor the computer is switched on.
• Prepare your computer for the TFT monitor if necessary with the correct settings for your TFT.
Connecting VGA / DVI-D Signal Cable
• Plug the signal cable into the matching VGA sockets on the computer and on the monitor. If your PC also has a DVI output,
you can connect your monitor by means of the DVI-D connector.
Note
Always connect only a single data cable, in order to avoid problems with the allocation of signals, if your PC has several
inputs (e.g. VGA and DVI).
Connect the Audio Cable (optional)
• Plug the audio cable into the matching ports on the computer and on the monitor. This should be "audio out", "line out" or
"speaker" on your computer.

Connecting the Power Supply

• Now connect the mains socket of the monitor using the mains cable supplied with a properly configured mains outlet. The
outlet should be near the monitor and ease to access. (same circuit).
• Your monitor features a power switch for turning your monitor on and off. If the switch is set to 0, then no power is
consumed. Set the switch to I and next switch your monitor on using the on/off switch.
• Then switch on your computer.
Controls
Function
Description
When this key is pressed the OSD (ON screen display) starts on your TFT monitor Confirm you
1 Menu/Enter
selection by pressing this key.
2 Auto With this key you can automatically adjust the image.
When OSD is active this key sets a parameter value and increases it.
3
Executing it directly raises the volume.
Increase volume
When OSD is active this key sets a parameter value and decreases it.
4
Executing it directly lowers the volume.
Decrease volume
With this switch you can switch the TFT monitor ON and OFF.
5 Power
Indicates the operating state.
6 Operation
Green = Normal mode,
indicator
Orange = Stand-by mode
1
2
3
4
Ill.: Rear view of monitor
(Ill.: Controls)
English
VGA connector
DVI-D connector
Audio connector
Power supply
EN
DE
NL
FR
DK
ES
IT
PT
SE
NO
FI
3