Connect The Power Supply; Switch On The Monitor; The Video Workstation - Medion AKOYA P55005 Bedienungsanleitung

3 Connect the power supply

 Now connect one end of the mains cable supplied with the device to TFT power supply connection and
then the other end to an appropriate socket. The mains socket must be in the vicinity of the TFT monitor
and be easily accessible (use the same electricity circuit as for the PC).

4 Switch on the monitor

 Switch your monitor on at the Standby/On switch on the front of the device. Finally, switch your computer on.

The video workstation

Please pay attention to the following: The monitor device should be set up so that mirror effects, fading and
strong contrasts between light and dark are avoided (even if the view from the window is still so attractive!)
 Surface supporting the hands: 5 - 10 cm
 Highest monitor line at eye level or somewhat below it
 Viewing distance: 40 to 70 cm
 Leg-room (vertical): At least 65 cm
 Leg-room (horizontal): At least 60 cm
(Ill.: Setting up the monitor)
(Ill.: Video workstation)
Bringing the device into operation
DE
EN
FR
ES
IT
NL
9