Unpacking And Mounting/Setting Up The Device; Mounting The Radio - Medion LIFE E66314 Bedienungsanleitung

6. Unpacking and mounting/setting up the
device
Remove all packaging materials.
DANGER!
Keep plastic packaging out of the reach of children.
There is a risk of suffocation.
Make sure that:
• the device and the battery are not exposed to strong heat sources;
• the device and the battery are not placed in direct sunlight;
• the device (DAB radio and mains adapter) never comes into contact with liquids,
including drips and splashes.

6.1. Mounting the radio

The under-cabinet radio is for mounting to the underside of a wall cabinet or shelf
unit. To mount the device, you will need 8 screws (included in the delivery). The size
and length of the screws must match the mounting plate and bracket.
 Select a suitable space near a mains socket.
 Remove the cover by pulling it back (in the direction of the arrow) and off the ra-
dio.
 Use the mounting bracket or the template to mark the drill holes (1).
 Drill 8 holes on the underside of the shelf unit (where you made your markings)
in order to fix the screws.
 Screw the mounting bracket to the bottom of the cabinet or shelf. Make sure
that UP faces up and FRONT faces to the front.
 Now place the device onto the notch of the mounting bracket and carefully
push the device back until it audibly clicks into place (2).
 Make sure that the wire aerial does not get caught.
112 of 124