Daily Maintenance; Changing The Gasket - Caffitaly System S11HS Bedienungsanleitung

Vorschau ausblenden

Inhaltsverzeichnis

Verfügbare Sprachen

•

Take out the used capsule drawer; empty and rinse it (Fig. 6).

•

Remove the drip tray and the grid (Fig. 7). Empty the drip tray. Wash the parts with fresh

water.

•

Remove the water tank (Fig. 5); empty and rinse it.

•

Gently turn the coffee dispensing spout clockwise by approximately 45° (Fig. 15) until it

comes to a stop, then remove it. Remove the top cover of the coffee dispensing spout

(Fig. 16) and wash the components in hot water.

•

Remove the outside of the steam dispensing tube and wash it in hot water to remove any

milk residue (Fig. 17). Clean the inside using a damp cloth.

Use a soft cloth and a neutral deter-

gent to clean the surfaces of the

appliance. Do not use jets of water to

clean the appliance.

WARNING! If the gasket shows signs of wear (small cuts or cracks,

deformations, ...) you can replace it easily using the spare gasket supplied in

the pack.

Perform the following operations only when the machine is cold; contact with

the inside surfaces of the machine could cause burns.

•

Raise the lever (Fig. 1).

•

Find the gasket.

•

Remove the worn gasket (Fig. 18), extracting it if necessary with the aid of a screwdriver.

•

Insert the new gasket, ensuring that it ﬁ ts snugly in place.

•

Close the lever (Fig. 3).

English