Technical Specifications; Operating Instructions - Flex FBE 8-140 Originalbetriebsanleitung

Technical specifications

Belt dimensions (length x width)
Belt speed
Power input
Power output
Weight (without power cord)

Operating instructions

WARNING!
Before performing any work on the electric
power tool, pull out the mains plug.
Before switching on the power tool
 Unpack the electric power tool and check
that no parts are missing or damaged.
 Attach sanding belt.
 Attach the handle.
Attaching or changing the sanding
belt
 Pull out the mains plug.
 Remove handle (1.).
 Swivel the housing cover to the side (2.).
14
Machine type
mm
m/s
W
W
kg
 Turn eccentric screw and release sanding
 Remove sanding belt (4.) (optional).
 Pull on new sanding belt and position
 Tighten sanding belt by turning the
 Close housing cover in front of the housing
Observe the specified running direction of
the belt! Running direction must correspond
with the arrow on the gear head.
Belt file FBE 8-140
533 x 4–9
4–12
800
325
2.4
belt (3.).
centrally on the sanding arm (5.).
eccentric screw.
again.
CAUTION!
FBE 8-140