Intended Use - MA lighting XL-F Schnellstartanleitung

Intended Use

The complete dot2 family is intended for control
moving lights, LEDs, video and other media
without the written consent of MA Lighting Technology GmbH.
Transport, operation and maintenance must be performed only by persons who are qualified for the
respective activity. The safety and operating limitations must always be respected.
The 2 dot product range consists of the following components, which can be operated individually or
within an Ethernet network:
dot2 XL-F dot2 XL-B
Manufacturer:
For more information and detailed manuals see: www.ma-dot2.com. Please check our Frequently Asked
Questions (FAQ), that you can find online at http://forum.ma-dot2.com/. If there are any questions left,
just send us an e-mail with your contact details and subject information to
E-Mail Service is monitored during MA Lightings regular business hours in Germany. For emergency
services please contact your local distributor.
of all kinds of lighting genres such as conventionals,
via DMX signal. And may not be used for any other purpose
dot2 core
Accessories included: dustcover, desk lamp, magnetic plate for labeling,
locking IEC cord with bare ends
MA Lighting Technology GmbH
Dachdeckerstraße 16
D – 97297 Waldbüttelbrunn
Germany
dot2 F-wing dot2 B-wing
support@ma-dot2.com
dot2
Data
Transport
Safety
Instructions
Limitation
dot2 Node
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
. This
Conformity
34