Hitachi KPI-502E1E Installations- Und Betriebshandbuch Seite 29

14. TEST RUN

WARNING
Do not operate the system until all the checkpoints have been cleared.
1. Check to ensure that the electrical resistance is more than 1 megohm, by measuring the resistance between ground and the terminal of the
electrical parts.
If not, do not operate the system until the electrical leakage is found and repaired.
2. Check to ensure that the unit does not make any abnormal sound or vibration.
15. SAFETY AND CONTROL DEVICE SETTING
Model
Fan Motor Internal
Thermostat
ºC
Cut-Out
ºC
Cut-In
Fuse for Control Circuit A
Fuse for Fan Unit
A
(Size)
(*) Thermostat of fan motor can not Cut-In automatically. If that cuts out, change the fan motor.
INSTALLATION AND OPERATION MANUAL
KPI-502E1E KPI-802E1E KPI-1002E1E
125ºC±10ºC 130ºC±5ºC 150ºC±5ºC
85ºC±10ºC 85ºC±5ºC 100ºC±5ºC
5 5
2(x2)T 2(x2)T
[6X32] [6X32]
KPI-1502E1E KPI-2002E1E
155ºC±5ºC 155ºC±5ºC
125ºC±15ºC 125ºC±15ºC
5 5
4(x2)T 4(x2)T 4(x2)T
[6X32] [6X32] [6X32]
29
KPI-3002H1E
150ºC±5ºC
100ºC±5ºC
5 5
6(x2)gG
[10X38]