Commissioning; Micro Sd Card - BMW Advanced Car Eye 2.0 Bedienungsanleitung

Commissioning

Micro SD card

The micro SD card is supplied in the micro SD
slot.
The micro SD card can only be inserted and
removed after the camera has been switched off
so as to prevent data loss and malfunctions.
Remove the protective foil from the
camera lenses
Remove the protective files from the camera
lenses on the front and rear window cameras.
Switch on the cameras
When the car's ignition is switched on, the ACE
2.0 automatically activates driving mode.
A Wi-Fi connection between the ACE 2.0
app and the ACE 2.0 to configure
or control the ACE 2.0 can only be
established for the first time when the
ignition is switched on.
After the initial firmware update, there is
a timeframe of 3 minutes to establish the
connection after the engine has been
switched off. The connection will remain
active for as long as you interact with the
ACE 2.0 using the ACE 2.0 app.
The ACE 2.0 app must not be used by
the driver whilst the engine is running.
The following contains instructions for switching
on the ignition regardless of the transmission
type.
Please also refer to the user's manual for
your car.
Year of
Model manufacture
from
1 Series 2004
2 and 4
2013
Series
3 Series 2005
5 Series 2009
6 Series 2011
7 Series 2008
X1 2009
X2 2018
X3 2011
X4 2014
X5 2013
X6 2014
Z4 2009
i3 2013
i8 2014
5 Series 2017
6 Series
2017
GT
7 Series 2015
X3 2017
X4 2018
Press the Start-
Stop button
Press Start-Stop
button once
Press Start-Stop
button three times in
quick succession
35