Safety Information - BMW Advanced Car Eye 2.0 Bedienungsanleitung

Safety information

The ACE 2.0 may only be installed by a BMW
workshop.
The ACE 2.0 app must not be used by the driver
whilst the engine is running or whilst driving.
If you sell the device, ensure that you give the
buyer the operating manual and the declaration
of conformity sheet.
The ACE 2.0 must be reset to default settings
before it is given to somebody else, see section
"ACE 2.0 app".
In addition, only the Wi-Fi of the ACE 2.0 can be
reset using an app command (see section
2.0 app") or key combination on the front camera.
Press the Power key (1) on the rear and the
microphone ON/OFF key (2) on the side of
the front camera simultaneously for at least
3 seconds for this purpose.
Ensure that the micro SD card has been
formatted before you hand over the device, see
section "ACE 2.0 app".
The ACE 2.0 can generally be restarted using the
Reset key if it suffers any system faults.
Please ensure that you do not damage
the microphone (4) by mistake.
Press the Reset key (3) on the underside of
the front camera for at least 3 seconds for this
"ACE
purpose.
Use a thin, sharp object to do so.
31