Operating Instructions - Leister MISTRAL PREMIUM Bedienungsanleitung

GB

Operating Instructions

Please read operating instructions carefully before use
and keep for future reference.
Hot air blower
MISTRAL
PREMIUM; SYSTEM
Application
The hot air blower MISTRAL is suitable for building into machines, installations or appliances.
Its most important applications include; drying and heating, thawing, accelerating and removal,
sterilising, smoothing, polishing, activation and dissolving, separating and fusing, shrinking.
18
Warning
Danger of death when opening the device, as live parts and connections are
exposed. The device must be fully disconnected from the mains before opening it.
Incorrect use of the hot air blower can present a fi re and explosion hazard
especially near combustable materials and explosive gases.
Danger – can cause burns ! Do not touch the heating element tube and nozzle
while they are hot. Allow the device to cool. Do not direct hot-air stream towards
people or animals.
Caution
The nominal voltage indicated on the device must correspond to the mains
voltage. EN 61000-3-11; Zmax = 0.126 Ω + j 0.079 Ω. If necessary, consult
your electricity supply utility.
The device must not be left unattended when in use.
Heat can reach combustible materials which are out of sight. The device may
only be used by trained personnel or under their supervision. Children may
not use the device under any circumstances.
Keep away from wet and damp areas.
(Translation of the original operating instructions)