Velleman CAMIP15 Bedienungsanleitung Seite 17

CAMIP15
Note: The network name begins with "+CAM" and ends
with the last 4 digits of the MAC id, which can be found on
the back of the camera.
5. Launch the iSecurity+ App
1. Once your mobile device establishes the connection to
the IPCAM (this takes about 30 seconds), launch the
iSecurity+ app. (See fig. 5)
2. The iSecurity+ app automatically detects your camera.
When prompted, click Yes to set up your camera.
6. Setup Wizard
Follow the instructions in the Camera Setup wizard to
complete the installation. (See fig. 6)
7. Camera Preview
If the connection to your mobile device is successful, you
will see the camera images on your mobile device. Proceed
with the next step. (See fig. 7)
8. Connect to Internet
1. Choose your Wi-Fi network to connect to internet. (See
fig. 8)
2. Enter your Wi-Fi network password and press Continue
to access internet. (See fig. 9)
3. Wait until your mobile device establishes the internet
connection. (See fig. 10)
9. Connect to iSecurity+
1. Create a new iSecurity+ account or use an existing
account to connect with the iSecurity+ app. (See
fig. 11)
2. Enter your iSecurity+ username and password and press
Sign in. (See fig. 12)
10. Set up Camera Info
1. Create the camera name (mandatory) and its
description (optional). Press Continue. (See fig. 13)
2. Wait until the camera is registered on the iSecurity+
server. (See fig. 14)
V. 02 – 14/05/2014 17 ©Velleman nv