Velleman CAMIP15 Bedienungsanleitung Seite 16

CAMIP15
Configuration
1. There's an App for That
To get started, download the iSecurity+ app from Apple's
App Store (iPhone, iPad) or the Google Play market
(Android).
2. Connect the Camera
(See fig. 2)
Plug the included power adapter into the camera and
connect it to a power socket.
3. Wi-Fi Setup Mode
(See fig. 3)
1. Make sure that the Wi-Fi setup switch on the back of the
camera is set to ON.
2. Wait until the Wi-Fi setup LED
indicating that the camera is ready for setup. This may
take up to 2 minutes when the camera is switched on
for the first time.
4. Connect the Mobile Device to the Camera
On your mobile device, go to Settings > Wi-Fi, and
connect to the IPCAM wireless network.
(See fig. 4)
V. 02 – 14/05/2014 16
glows green,
©Velleman nv