Usb Connection; Wireless Remote Control - Pulsar XQ30 Handbuch

The zoomed image is displayed in a dedicated window, with the full
magnification being shown.
The rest of the image is displayed only with the optical magnification
(digital zoom is off).
When PiP is turned off, the image is shown with the full magnification
set for the PiP function.
20
STREAM VISION
TRAIL thermal sights support Stream Vision technology which allows
you to stream an image from the display of your thermal sight to a
smartphone or PC tablet via Wi-Fi in real time mode. You can find further
guidelines on Stream Vision in a separate booklet or at our web site
www.pulsar-nv.com
Note: the Stream Vision application allows you to update the software
features of your thermal sight.
Scan the QR codes to download Stream Vision free of charge:
Google Play (Android OS):
21

USB CONNECTION

Connect one end of the USB cable to the Micro-USB (10) port of your
sight, and the other end to the USB port of your PC/laptop.
Turn the sight on with a short press of the ON (11) button (sight that
has been turned off cannot be detected by your computer).
Your sight will be detected by the computer automatically; no drivers
need to be installed.
Two connection modes will appear on the display:
Memory card (external memory)
and Power.
Select connection mode with UP
and DOWN buttons.
Confirm selection with a short
press of the M button.
29
iTunes (iOS):
USB connection
Use as power
Use as memory card
Connection modes:
Memory card (external memory). In this mode the sight is detected
by the computer as a flash card. This mode is designed for work with
the files saved in sight's memory. The sight's functions are not
available in this mode; the sight turns off automatically.
- If video recording was in progress when connection was made,
recording stops and video is saved.
Power
In this mode your PC/laptop is used as an external power supply. The
status bar shows icon
functions are accessible.
Note: The Battery pack installed in the sight is not being charged!
USB disconnection.
When USB is disconnected from the sight where connection is in the
USB Mass storage sight mode, the sight remains on the OFF state.
Turn the sight ON for further operation.
When USB is disconnected from the sight when in the Power mode,
the sight keeps operating with Battery Pack, if available, and it has
sufficient charge.
22

WIRELESS REMOTE CONTROL

Wireless remote control (RC) duplicates the POWER ON function, digital
zoom, video start/stop and menu navigation.
The RC controls are:
ON Button (15): duplicates the functions of
the ON (11) button.
Button (16): digital zoom activation.
Function PiP.
Button (17): duplicates the functions of the
REC (6) button.
Controller (18): duplicates the functions of the М (4) button when
pressed; duplicates the functions of the UP (10)/DOWN (8) upon
rotation (in hot menu/main menu).
. The sight continues operating and all
16
15
18
17
30