Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.10 Sector Set
Sector No:
8 prgrammable sectors are available. They are adjusted with the joystick.
Sector Set: ID
The sector ID may consist of 16 digits. Move the joystick left/right to select.
To move from left to right to the next digit, press ZOOM TELE.
To move from right to left to the next digit, press ZOOM WIDE.
Blanks are marked with a .
If the camera moves through this zone, it displays the letter defined by you.
Sector Set: Sector Start:
To initiate SECTOR START, press FOCUS FAR and move the joystick left/right.
Exit this page by pressing FOCUS FAR again.
Sector Set: Sector End:
To initiate SECTOR END, press FOCUS FAR and move the joystick left/right.
Exit this page by pressing FOCUS FAR again.
Sector Set: Save:
Once the sector position has been set, it is stored by going to „SAVE" and by
moving the joystick left/right. After the saving is done, the cursor goes to the next
"sector" (no. 2).
Sector Set: Exit:
Move the joystick right to exit this page.
To exit the OSD main menu, move the joystick left/right.
The camera is now ready to operate!
_________________________________________________________________________________
Bedienungsanleitung / User manual VDC-610ID/W
- 58 -
Werbung
Inhaltsverzeichnis
