Bedienungsanleitung / User manual VDC-610ID/W
Notes:
Once a password has been created, it has to be used to access the ODF main
menu and to make changes here.
The user has to know the right password. The device is delivered without a
saved password.
Dome Set: OSD Display:
The IDs for „Camera", „Preset", „Sector" and „Coordinate" are displayed when „ON" is
selected and they are not displayed when „OFF" is selected. Move the joystick
left/right to select between OFF/ON.
Dome Set: System Status:
This page displays the camera information.
Protocol and Baud rate are displayed depending on the settings of the DIP switch.
Firmware version and data upgrades are applied.
The following camera modules can be set as follows.
SDM100:
EN300:
_________________________________________________________________________________
SAMSUNG 10x zoom camera module
3x optical pan focus module
Board camera (with fix focal length
- 47 -
Default setting
Default setting