Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Bedienungsanleitung / User manual VDC-610ID/W
2. Installation
2.1 Connections
6. Loosen the screws which are used to fix the camera to the bracket. Separate the dome
cover from the bottom. The screws don't need to be removed completely.
Connect the power cord (12 V DC; 1.5 A) to "power".
7.
Connect the video cable to the video output "video".
8.
9.
Connect the RS-485 connector.
10.
Connect the alarm cable to the connectors 1, 2, 3, 4, GND. You may use N.O. as well as
N.C..
_________________________________________________________________________________
- 39 -
Werbung
Inhaltsverzeichnis
