Cleaning And Maintenance; Technical Information - ECG TV 15 Bedienungsanleitung

Safety thermal fuse
1. The device is also equipped with a safety thermal fuse, which automatically switches the device off
if it experiences overheating.
2. If the device experiences overheating, disconnect the device from the outlet and leave it to cool
down for 10 minutes. Afterwards, you may connect the device and turn it on again.

CLEANING AND MAINTENANCE

Unplug the device and let it cool down before cleaning. Clean the outer surface of the hot air ventilator
with a damp cloth. Do not use sharp or abrasive agents to clean the device, otherwise the surface can
become damaged.
The hot air ventilator can be put away only after it has been properly turned off, disconnected from
the outlet and cooled down.

TECHNICAL INFORMATION

Max. input power 2400 W
3 setting levels
Cold / warm air function (1200 / 2400 W)
Smooth thermostat regulation
Thermal fuse
Power ON indicator light
Nominal voltage: 230 V~ 50 Hz
Nominal input power: 2200 W
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard.
Packing foil, PE bags, plastic elements – throw into plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other
European countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic
waste. Hand over the product to the specified location for recycling electric and electronic equipment.
Prevent negative impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this
product, refer to your local authority, domestic waste processing organization or store, where you
purchased the product.
17
EN