Scope Of Delivery; Technical Description - Waeco CoolFun CD28 Bedienungsanleitung

Scope of delivery

4 Scope of delivery
No. in
fig. 1, page 3
1
2
–
5

Technical description

The cooler is suitable for mobile use. You can cool products to a maximum
of 20 °C under the ambient temperature or warm them to a maximum of
65 °C.
The lightweight insulating lid can be used as an alternative to the unit lid
when transporting. Make sure that the insulating lid does not cool.
Its cooling system is a non-wearing Peltier cooling, the heat is discharged by
a fan.
When the cooler is connected to a 230 V AC mains supply, it can be used in
two different operating modes:
 ECO mode: the cooler consumes less energy
 MAX mode: the cooler reaches maximum cooling capacity
The desired cooling capacity is selected with the cooling capacity control:
➤ To increase the cooling capacity, turn the cooling capacity control clock-
wise.
For the maximum cooling capacity turn the cooling capacity control
clockwise all the way to the stop (max position).
➤ To decrease the cooling capacity, turn the cooling capacity control
counterclockwise.
To turn off the cooler, turn the cooling capacity control counterclockwise
all the way to the stop (off position).
When the cooler is connected to the DC socket, the cooling capacity cannot
be adjusted. In this case the cooler cools maximal.
22
Quantity Description
1 Cooling device
1 Insulating lid
1 Instruction manual
CoolFun CD28
EN