Adding Your Pet - Access Permissions - Sure Flap Microchip Cat Flap Connect Bedienungsanleitung

Adding your pet - access permissions

Before fitting your Microchip Cat Flap Connect, you need to add your cat's microchip
ID to it. You'll need to get them to put their head inside the tunnel so their microchip
ID can be read and memorised. This product gives you the flexibility of giving outdoor
access to some of your cats whilst others are kept indoors.
If you are using your Microchip Cat Flap Connect system for multiple cats, avoid mixing
up microchip IDs by adding each cat separately and making a note of the order you
added them. This will be useful when you create their pet profiles in the Sure Petcare app.
Adding a cat with outdoor access
1
2
3
4
5
9
Make sure the manual lock is set to
Position 1 before you begin. See page 27
for more information.
1x
Remove the battery compartment cover to reveal the 'Add a Pet'
, press it once and then release it.
button
When the Cat Flap is in 'Add a cat with
outdoor access' mode, the catches will drop
(you will hear a click) and the indicator light
will flash GREEN once every second.
Place some dry food or a treat inside the tunnel as close to the
clear plastic door as possible. The aim is to encourage your
cat to put its head inside the tunnel or to pass through the flap
in either direction. When your cat enters the tunnel to eat the
food, the sensors inside the product activate and the Cat Flap
saves the cat's microchip ID in its memory.
Once your cat's microchip ID has been
successfully added, the indicator light will
stop flashing and the catches will move
up (lock) when the cat has moved away
from the Cat Flap.
Position 1