Program Your Pet Into The Pet Door; Connect Your Pet Door To Your Hub; Pet Profiles - Sure Flap Microchip Pet Door Connect Bedienungsanleitung

Program your pet into the Pet Door

To program your pet's microchip ID into the Pet Door, you'll need to get them to put their head
inside the Pet Door tunnel so their chip can be read. If you're adding multiple pets, avoid mixing up
microchip IDs by adding each one separately (and making a note of the order you added them).
We strongly advise programming all of your pets into the Pet Door before fitting it.
Remove the button cover to reveal the six buttons on the front
1 of the Pet Door. Press the 'Add a pet' button once to activate
the 'Add a pet' mode.
When the Door is in 'Add a pet' mode, the catches at the front
2 of the Pet Door will drop (you will hear a click) and the display
on the LCD screen will start flashing.
The Pet Door is now waiting for your pet. Place some dry food
or a treat inside the tunnel as close to the clear plastic door
3
as possible. The aim is to encourage your pet to put its head
inside the tunnel as if it were coming home.
When your pet enters the tunnel to eat the food, the sensors
4
inside the product activate and the Pet Door saves the chip ID.
Once the microchip has been successfully added, the screen
display will show the number that has been assigned to the pet,
e.g. 01 for the first pet you add and 02 for the second etc. When
your pet removes its head from the tunnel the catches on the
5
Door will move up again and the screen will go back to normal.
We advise that you encourage your pet to put its head back into the tunnel once it's programmed in.
This is to double check that they can open the door reliably. Repeat this process to add more pets.
To perform the programming process with the RFID collar tag simply follow steps 1, 2 and 4
above and hold the collar tag inside the tunnel, making sure you touch the clear plastic door.
Make sure you are not wearing any metal jewellery when programming a collar tag as this can
cause interference.
If you want to use the Pet Door for more than one pet, you can add more pets easily by
repeating the process. You are able to store up to 32 pets in each Pet Door. If your Pet Door
is already installed but you are looking to add an additional pet then press the 'Add a pet'
button and wait for that pet to go through the door.
13

Connect your Pet Door to your Hub

In order to complete the setup of your Microchip Pet Door Connect system you will need to
connect your Pet Door and Hub. This is so that your Pet Door can communicate with your Hub
and be controlled remotely using the app.
For this process you will need to be on the 'add a product' section of the app or Sure
Petcare online and your Pet Door will need to be in its intended location (either placed
or fitted). You will also need a pen or pencil handy.
1 2
Open the app or go online, and When prompted to do so on the
select 'Add a product'. This will app or online, press the settings
put your Hub into connecting button on your Pet Door once. The
mode and its ears will start to green light will illuminate to show
flash green. it's in connecting mode.
Once your Hub and Pet Door are connected you can control your Pet Door's features remotely on
the app or Sure Petcare online. Give your Pet Door a name e.g. its location - "Back Door", and feel
free to purchase and add more Sure Petcare connected products to your network.

Pet Profiles

Now that your Pet Door and Hub are connected, any data stored in
your Pet Door can be uploaded directly to your app. This includes
any pet ID numbers you have programmed into the Door. Once the
app detects these ID numbers you'll be able to create profiles for
your pets.
Select your pet's ID number to create their profile, then add their name etc.
and upload a profile picture, or even take a new photo directly through the
app. You are able to create profiles for multiple pets, all you need is for their
microchip to be programmed into the Pet Door and you're ready to go.
EN
3
Once your Hub and Pet Door are
connected, this symbol .
will appear on the Pet Door's
screen and your Hub's ears will
return to solid green.
14