Open, Down And Stop Keys; Menu Mode - weinor BiEasy 15M Bedienungsanleitung

Switching the operating mode within a group changes
the "Auto" or "Manual" operating mode for all individual
channels of the group.
A different "Auto" and "Manual" operating mode in individual
channels is shown in the display with an orange operating
mode indicator and "Automatic icon" and "Manual icon"
side by side.

4.4.6 OPEN, DOWN and STOP keys

Actuating the keys initiates a travel operation or a stop in
the channel of the programmed receiver.
4.5

Menu mode

The functions of the device are divided into menus.
In the initial display select "Menu" and then the desired
menu or submenu.
Exiting the current menu level: Select "Back", if
necessary select "Back" repeatedly until you are returned
to the initial display or otherwise press and hold "Back".
Entering text: To enter text (e.g. for naming groups and
channels), you can use the text input to select upper and
lower case, numeric characters, special characters and
accented characters. The selected character set is visually
supported by highlighting the allocated icons in the display.
Dialogue guidance in the display is menu-guided.
All functions can be accessed via the various menus.
See diagram below for a view of the complete menu
structure:
Ⓒ weinor GmbH & Co. KG
24 | EN
BiEasy 15M menu structure
Administration Channels
Channel-related allocations (text field 1, text field 2, groups)
Group selection for channel allocation and text input
Groups
(text field 1, text field 2, channels)
Text input (text field 1, text field 2)
All
on availability >/= 1 channel
Reset
Resets all group allocations and text fields
Settings
Language Selection of language
Lighting Backlighting of display
Channels }
Groups Product selection
Intermediate position or
All
intermediate position 1
(in seconds)
Ventilation /tilting position or
intermediate position 2 or
fabric tautening position (in 0,1 s)
Reset all settings to factory settings
(texts, groups, language;
Function
Factory setting
channel settings without channel allocation change)
Expert Alle On / Off
INFO On / Off
Version
Information on the software version
Fig. 4 Menu structure of the BiEasy 15M
Ⓒ weinor GmbH & Co. KG
Product-related transmitter configuration of
individual channels by runtime, transmission mode,
product pictogramm (channels only)
Setting travel to intermediate position
(factory setting: no runtime)
Setting travel time to
desired postition
(factory setting: no runtime)
Enabele or disable option for selecting
master channel (all individual channels)
Enable or disable periodic query
for position reports during travel
in groups and in master channel
EN | 25