Safety; General Safety Instructions; Safety Principles; General Obligations Of The Operator - weinor BiEasy 15M Bedienungsanleitung

2

Safety

2.1

General safety instructions

The operating instructions contain all safety instructions
that must be observed to avoid and prevent dangers
arising from using the device in combination with the
motors and components that it controls in its various life
cycles. The device is guaranteed for safe use if all safety
instructions are observed.
2.2

Safety principles

The device is designed and constructed in accordance
with the state of the art and accepted safety technical rules
and is inherently safe. The basic occupational health and
safety requirements of the applicable laws, standards and
directives have been incorporated into the design of the
device. The safety of the device is confi rmed by declaration
of incorporation.
All information on safety is based on the currently valid
regulations of the European Union. In other countries the
operator must ensure compliance with the applicable laws
and national regulations.
In addition to the safety instructions in the operating
instructions the generally applicable regulations for accident
prevention, environmental protection and occupational
health and safety applicable at the place of use must be
observed and complied with.
The device may be used only if it is in good technical
condition and used safely in conformity with the regulations
and in awareness of possible hazards as directed by the
operating instructions. The device is designed for use as
Ⓒ weinor GmbH & Co. KG
8 | EN
specifi ed in the chapter on "Proper use". Improper use
of the device may result in danger for life and limb of the
user or other persons and damage to the device and other
property. Accidents or near-accidents when using the
device, which could cause or may have caused injury to
persons and/or damage in the vicinity, must be reported
directly to the manufacturer without delay.
All safety instructions on the device and in the operating
instructions must be observed at all times. In addition to
the safety instructions, the operator must ensure compli-
ance with all applicable national and international regu-
lations and additional applicable regulations regarding
operational safety, accident prevention and environmental
protection. Only trained technicians qualifi ed to work sa-
fely and authorized are permitted to carry out any work on
the device.
2.3

General obligations of the operator

 The operator is required to use the device only if it
is good and safe condition. In addition to the safety
instructions in the operating instructions, the general
safety and accident prevention regulations, the
requirements of DIN VDE 0100 the environmental
protection regulations of the country of use must be
observed.
 The operator is responsible for ensuring that all work on
the device is conducted by trained technicians who have
been authorised and trained in safe operation.
 The operator or authorised personnel are also
responsible for accident-free operation.
Ⓒ weinor GmbH & Co. KG
EN | 9