Remote Access - switel DET 2872C Bedienungsanleitung

Answering Machine
TAM PIN
TAM DEFAULT Resetting the answering machine to delivery state.

Remote access

You can ring your phone from another tone-dialing phone.
• Dial your own telephone number.
• If the answering machine is set to off, it will answer after 10 rings.
If the answering machine is set to on it will answer after the preset delay.
If the TAM memory is full it will answer after 10 rings announcing OGM 2 and the hint that the
memory is full.
• Press the star key whilst hearing the OGM then enter the TAM PIN.
• You will hear a voice prompt telling you whether you have any new messages.
• If yes, it will start playing them.
• If not you will get to the main menu by pressing 1.
In the main menu you have the following options:
Key
1
5
7
9
During playback of messages you have the following options
Key
2
4
44
5
6
8
☞
The connection will be cut off if a wrong remote PIN is entered three times.
24
after two rings. If no new messages are available the call will be answered after six
rings. Therefore you can check remotely whether or not new messages are available
without having to make a connection.
Enter the remote access PIN (default 0 0 0 0). This PIN is needed for remote access-
ing the answering machine from a tone-dialling (DTMF) telephone.
Function
Play the main menu.
Play messages.
Switch the TAM on.
Switch the TAM off.
Function
Delete current message.
Repeat the current message.
Skip backwards to the previous message.
Start / stop playback (pause).
Skip forward to next message.
Stop playback (back to main menu).