Herunterladen Inhalt Inhalt Diese Seite drucken

Operating The Telephone; Telephoning; Quickdial - switel POWERTEL TF 57 Bedienungsanleitung

Notruftelefon mit anrufbeantworter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4 Operating the Telephone

Display and explanation of operation sequences
ë
*
2 x *
2 Sec. *
Press and hold *
Release *
{ì}
è
é
The translucent digit key block is illuminated from inside as soon
as you lift the receiver, press a button or an incoming call is
received.

5 Telephoning

Taking a call
{ì}, è or ™
Ending a call
™or é
Making a call
è or ™
ë
Redialling
Your telephone stores the last phone number dialled.
è or ™, £
Enter digits or letters
Press the button depicted briefly
Press the button depicted twice, briefly
Press the button depicted for 2 sec.
Press and hold the button depicted
Release the button depicted
Telephone rings
Lift the receiver
Replace the receiver on−hook
Take the call
End the call
Lift the receiver or activate handsfree
Enter the phone number
(max. 32 digits)
Dial the last number dialled
One−touch dialling
You can use the one−touch dialling buttons M1, M2 and M3 for normal
direct dialling or as memory locations for the automatic emergency call
function. Be sure to store phone numbers for one−touch dialling first;
. Page 43.
è or ™
^, _ or `

Quickdial

It is possible to store 10 phone numbers so that they are dialled simply by
pressing three buttons (quick dialling).
Programming quickdial buttons
è
ë, ”
0
é
Dialling using quickdial buttons
è or ™
 
0
The phone number stored is automatically dialled.
Increasing the receiver volume to +40 dB
The receiver volume can be increased to +40 dB by pressing the left−hand
volume button.
Ý
Operating the Telephone
Lift the receiver or activate handsfree
Press the one−touch dialling button
required
Lift the receiver
Press the memory button
Enter the phone number
(max. 32 digits) and confirm it
Enter the required memory location
number (e.g. in this case for memory
location 0)
Replace the receiver on−hook
Lift the receiver or activate handsfree
Press the quickdial button
Enter the required memory location
number (e.g. in this case for memory
location 0)
Increase the receiver volume
41

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis