switel DC682 Combo Bedienungsanleitung Seite 170

Starting Up
Charging the batteries
When the handset is inserted in the charging station properly, you will hear a confirma-
tion signal. The handset warms up during the charging process. This is normal and
does not represent a risk. Do not charge the handset with charging units from other
manufacturers. The current battery charge status is indicated in the display:
Full
Setting the display language
Select the language required. Refer to Page 182 for the sequence of menu option
selections.
O > MT EINSTELL > SPRACHE >..(O > HS SETUP > LANGUAGE >...)
There are 13 languages available for selection.
Setting the time and date
The time and date are set via the menu. Refer to Page 181 for the sequence of menu
option selections.
Automatic answering (auto answer)
If this function is activated, an incoming call is taken when the handset is removed from
the charging station. The automatic answering function is activated and deactivated
using the menu. Refer to Page 182 for the sequence of menu option selections.
Private branch exchanges
The information on Page 203 explains how to install your telephone (base station) in a
private branch exchange.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT
cordless telephones when in Standby mode with the handset in the charging
station.
In talk mode, radiation is reduced depending on the distance between
the handset and telephone (base station).
170
116
Before the handset is used for the first time, insert it in the charging station
for at least 16 hours.
Half empty Low Empty