switel DC681 Bedienungsanleitung Seite 92

Preparing the Telephone
Charging the batteries
When the handset is properly inserted in the base station / charging station, you will
hear an acoustic signal. The handset warms up during the charging process. This is
normal and does not represent a risk. Do not charge the handset with charging units
from other manufacturers. The current battery charge status is indicated in the dis-
play:
Full
Setting the display language
Select a language (cf. Menu Structure"):
O > HS SETUP > LANGUAGE >...
There are 13 languages available for selection.
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 97 for the sequence of menu
option selections.
Automatic answering
If this function is activated, an incoming call is taken when the handset is removed from
the base station. The automatic answering function is activated and deactivated using
the menu. Refer to Page 98 for the sequence of menu option selections.
Private branch exchanges
The information on Page 107 explains how to install your telephone in a private branch
exchange.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT
cordless telephones when in Standby mode when the handset is in the base
station.
In talk mode, radiation is reduced (depending on the distance between the
handset and base station).
92
57
Before the handset is used for the first time, insert it in the base/charging
station for at least 16 hours.
Half empty Low Empty