Troubleshooting - switel BCC 47 Bedienungsanleitung

8 Troubleshooting

1. No power
S
The device is switched off. Switch the device to position CH1 or
CH2 using the OFF/CH1/CH2 switch.
S
Ensure that the batteries have been inserted correctly.
S
Check that the adapter plug is correctly connected to the device.
S
Check the battery charge status. Insert the new batteries, if
necessary.
2. No acoustic signal and power−on lamp is off
S
Volume control on the receiver unit is set too low. Set a higher
volume.
S
Sensibility control on the transmitter unit is set too low. Set a
higher sensibility.
S
The devices are out of range. Reduce the distance between the
transmitter and receiver units.
S
Check that both devices are set to the same channel and pilot
tone.
3. Interference noise can be heard from the receiver
S
Check that both devices are set to the same channel and pilot
tone.
S
Reduce the distance between the transmitter and receiver units.
S
Insert the batteries correctly.
4. Other voices or noises are received
S
Signal disturbances resulting from other Babyphones transmitting
on the same channel and pilot tone or through cordless phones.
Change the channel and pilot tone to reduce interference.
5. High tones (acoustic feedback)
S
Receiver and transmitter units are too close together. Increase
the distance between the transmitter and receiver units.
S
The sensibility is too high. Reduce the transmitter sensibility
setting.
45