Searching For A Channel - switel WTF712 Bedienungsanleitung

Operating the Walkie−Talkies

Searching for a channel

Signals are searched for in the eight channels in a continuous cy-
cle. The
tected, the channel search stops. The Ready LED flashes once per
second. Press the P button to enable radio communication. If
the P button is not pressed, channel search resumes after five
seconds.
Start / End channel search
N
Resuming search for a channel
:
Excluding a channel
35
If a channel found during the channel search process should not be
considered for subsequent use, it can be excluded. All the channels
are taken into consideration again when a new channel search is
started.
a, ;
Defining a group of channels
36
It is possible to define a group for the channel search. Scroll
through all the channels and define whether the individual channel
should be considered in the channel search or not.
6 x M
: [ y ], P
62
icon appears in the display. If an active channel is de-
The channel set at the beginning of a channel search
cannot be excluded.
The channels set to y" are taken into account during the
channel search, this set to −" are excluded. Set every
channel to −" in order to include all the channels again.
Start/End the search for a channel
Continue the search for a channel
The channel is excluded and the
channel search automatically
resumed
Activate Setting mode
Add the channel and confirm it