Charging The Battery Pack; Attaching The Belt Clip - switel WTF712 Bedienungsanleitung

Preparing the Walkie−Talkies for Use

Charging the battery pack

Connect the walkie−talkies as illustrated in the diagram. For safety
reasons, only use the power adapter plug supplied.
Mains power outlet
Before using the walkie−talkies for the first time, charge them for at
least 14 hours. When the walkie−talkies are connected correctly, the
red LEDs light up. The LEDs only signal that the connection is cor-
rect and continue to light up even when the battery packs are fully
charged.
The current battery charge status is indicated in the display:

Attaching the belt clip

Insert the belt clip in the opening
provided until it audibly snaps
into place. To remove the belt
clip, press on it and pull it from
the opening.
58
Do not charge the walkie−talkies with charging units from
other manufacturers.
Full Half empty
As soon as the indicator flashes in the display and acou-
stic warning signals are issued, the battery pack needs to
be recharged.
Low Empty