Herunterladen Inhalt Inhalt Diese Seite drucken

Sonus Faber Venere S Bedienungsanleitung Seite 29

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

VENERE S - DATA SHEET
Loudspeaker System
Tweeter
Midrange
Woofer:
Cross-over:
Frequency Response
Sensitivity (2.83V/1m)
Nominal impendence
Suggested Amplifier Power Output
Long-term max input voltage (IEC-268-5)
Total dimensions HxWxD (mm)
Weight (kg/each)
Shipping weight (kg)
3 way floorstanding speaker.
29mm high definition precoated fabric dome driver.
DKM dome diaphragm visco-elastically decoupled from the
baffle. Sonus faber design.
1x150mm cone driver. Ultra free compression basket, Sonus
faber design. Thermo-mouldered polypropylene textile cone
(Curv). Ultra dynamic performance and linearity. Special coaxial
anti-compressor is used to remove resonances and distortions.
Sonus faber design.
3x180mm cone driver. Free compression basket. Aluminum
cone for maximum speed. Ultra dynamic performance and
linearity. Sonus faber design
Non-resonant "progressive-slope" design, optimazed phase
response for optimal space/time performance, "paracorss
topology" on every network. (Nano-technology deposition on
the pcb rails).
Cross-over point: 250Hz – 2500 Hz
0 Hz -25.000 Hz
90dB SPL
4 Ohm
40W – 300W without clipping
22V rms
1.236 x 391x 477,5
28,8
39

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis