Dräger DrugTest 5000 Technischer Handbuch Seite 54

Appendix
4. Once the sample amount
indicator changes colour to
blue, an adequate sample
amount has been collected
and the test subject can
remove the sampler from
the mouth.
5. Take the oral fluid sampler
from the test subject and
insert the oral fluid sample
collector with the sampler
first into the open
transportation tube.
6. Close the transportation
tube with the sealing plugs
and clearly label
sample on the tube.
7. In case of increased
sample demand conduct
sampling with other
samplers or
simultaneous dual
sampling.
9.3.4 Sample labelling
In order to ensure the identity of a sample it needs to be
labelled carefully. Ensure that these details correspond to the
details on the order form.
54
the
by
9.3.5 Shipping supplies
Dräger DCD 5000 sampler including transportation tubule,
required address labels, order forms and suitable shipping
packaging can be obtained from your Dräger Safety
representative or the representative of the laboratory of your
choice. Always ship in accordance with applicable local, state,
or federal regulations.
1. If required stick a safety seal/originality label over the
sealing plug.
2. Complete the order form for the laboratory.
05723950.eps
3. Pack the transportation tube for shipping, or alternatively
for storage. Shipping or storage has to be in accordance
with local or federal regulations (e.g. by using special
envelopes).
4. Send samples to the analysis service of the Dräger Safety
AG & Co. KGaA, Revalstr. 1, D-235650 Lübeck.
NOTICE
i
i
Potential mailing errors:
Error variations by mailing of up to 30 % are known for
diverse clinical parameters and chemical provisions
In the meantime some laboratories offer their own
05823950.eps
pickup or courier services.
1) Vorlaender, K. O. (1980): Diagnostics using immunological
methods, published by Georg Thiem, Stuttgart
05923950.eps
Dräger DrugTest 5000 Testsystem
1)
.