Switching Off; Temperature Regulation; Frostmatic Function; First Use - AEG S84100DTX0 Benutzerinformation

1 Fan function switch
Fan light
2 Temperature regulator
Frostmatic button
3 Frostmatic indicator
Switching on
Remove, if present, the remove label stuck on the inside of the freezer compartment.
Insert the plug into the wall socket.

Switching off

To switch off the appliance remove the mains plug.

Temperature regulation

The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• press the temperature regulator more times until the LED corresponding to the required
temperature lights up. Selection is progressive, varying from +2°C to +8°C.
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping in mind that the temperature inside
the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
If the ambient temperature is lower than 16°C press the temperature regulator until the
LED corresponding to the lowest temperature lights up.

Frostmatic function

You can activate the Frostmatic function by pressing the Frostmatic button more times un-
til the LED corresponding to the symbol Frostmatic indicator lights up.
To deactivate the Frostmatic function, press more times the Frostmatic button until the re-
quired temperature is selected.

FIRST USE

Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a brand-
new product, then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.
29
First use