Door Reversibility - AEG S84100DTX0 Benutzerinformation

40
Installation

Door reversibility

WARNING!
Before carrying out any operations, remove the mains plug from the power socket.
To carry out the following operations, we suggest that this be made with another person
that will keep a firm hold on the doors of the appliance during the operations.
To change the opening direction of the door, do these steps:
1. Remove the upper hinge taking care for
the upper door not to fall off and keep
it for future actions.
2. Remove the upper door.
3. Remove the upper support and install it
in the opposite side.
4. Unscrew the middle hinge (H). Unscrew
the plastic plugs located on the opposite
side of the middle hinge and introduce
them in the holes occupied before by
the hinge.
5. Remove the lower door.
6. Remove the ventilation grille which is
fixed by two screws.
7. Carefully place the appliance on its back,
totally unscrew the adjustable foot and
screw it in the opposite side.
8. Remove the bottom hinge by unscrew-
ing its fixing screws.
9. Using a 12 mm spanner, unscrew the
hinge pin and reassemble it on the op-
posite side of the hinge.
H