36 4.3 Arcticpro 200Yf; Setting Language; 36 4.3.2 Setting Date And Time; 36 4.3.3 Setting Workshop Data - MAHLE ArcticPro 200yf Originalbetriebsanleitung

en 48 | ArcticPro 200yf | Commissioning
4.3 ArcticPro 200yf

The ArcticPro 200yf is designed for 230 V, 50/60 Hz.
Follow the information on the ArcticPro 200yf rating
plate.
1. Set the ArcticPro 200yf on a flat, vibration-proof surface.
2. Actuate the caster brake to stop the ArcticPro 200yf
from rolling.
3. Connect the power supply cable to the power supply.
4. Switch on the main switch.
@ The self-test starts automatically. The start
screen appears following successful completion
of the self-test.
@ The fan is switched on.

The fan runs while the ArcticPro 200yf is switched on.
4.3.1

Setting language

1. Select "Settings >> General settings >>
Language".
2. Select language with .
3. Store entries with O.
4.3.2 Setting date and time
1. Select "Settings >> General settings >>
Date and time".
2. Alter values with input keys.
3. Move to next value with  .
4. Store entries and return with O.
© MAHLE
4.3.3 Setting workshop data
1. Select "Settings >> General settings >>
Workshop data".

A maximum of 30 characters can be entered.

Delete values previously entered with <C>.
2. Alter values with input keys.
3. Store entries and return with O.
4.3.4 Activating / deactivating printer,

workshop info, buzzer, operator list

1. Select "Settings >> General settings >>
System settings".
2. Select the menu item printer, workshop info, buzzer or
operator list with .
3. Activate/deactivate with .
4. Store entries and return with O.
Activation Description
Operator list An operator must be selected or a new
operator entered prior to each A/C service.
Workshop info Workshop data are printed out together
with the service print-out
Buzzer An audible alarm additionally sounds
in the event of error messages.
Printer Printer ready for operation.
4.3.5 Maximum service data records

The ArcticPro 200yf stores the service data sets. The
factory limit value setting for the maximum number of
data sets is 400.

If the number of stored data sets exceeds the limit,
service can no longer be performed. Further service
work is only possible after transferring the data sets to
a USB stick.
1. Select "Settings >> General settings >>
Maximum service data records".
2. Alter values with input keys.
3. Store entries and return with O.