Ec Declaration Of Conformity - Storch ProCut basic Bedienungsanleitung

Warranty
Warranty conditions:
A warranty period of twelve months from the date of purchase/date of invoice applies to our tools for commercial custo-
mers. If we have granted an extended warranty period, this period will be noted separately in the operating manual for
the equipment in question.
Claims:
If you wish to claim under our warranty or guarantee, please return the complete device and your invoice to our logistics
centre in Berka, postage paid, or send it to one of our authorised service centres.
Please contact the chargeable STORCH service hotline first: +49 (0)202 . 49 20 – 110.
Your rights under our warranty or guarantee:
Claims can only be accepted for material defects or manufacturing errors, and only assuming intended use of the appli-
ance. Wear parts such as the cutting wire (art. no. 57 00 46) and fuses (art. no. 57 00 04) are not covered by such
claims. All claims shall become void in the event of installation of third party components, improper handling and sto-
rage, as well as in the event of obvious disregard of the operating instructions.
Repairs:
All repairs have to be conducted on our premises or by an authorised STORCH service centre.

EC Declaration of Conformity

Name / Address of issuer:
We herewith declare:
that the following machine complies with the fundamental health and safety requirements of the EC Directives in
terms of its design, construction and version we have brought into circulation.
This warranty loses its validity in case of unauthorised modification of the tool.
Machine Type:
Designation of the machine:
Item number:
Applicable Directives:
Machinery Directive:
Low Voltage Directive:
EC- Electromagnetic Compatibility
Directive:
Representative authorised to compile the technical documentation:
STORCH Malerwerkzeuge & Profigeräte GmbH
Platz der Republik 6 - 8
D-42107 Wuppertal
Germany
Jörg Heinemann
- Managing Director -
Wuppertal, 04 - 2015
STORCH Malerwerkzeuge & Profigeräte GmbH
Platz der Republik 6 - 8
D-42107 Wuppertal
Foam board cutter
ProCut basic ProCut basic 128
57 00 70 57 00 75
2006 / 42 / EC
2006 / 95 / EC
2004 / 108 / EC
41