Accessories - Storch Variotool Bedienungsanleitung

Tool description Variotool
Variotool 10.8 V
(Fig.1)
1. ON/OFF switch
2. Battery pack
3. battery release button
4. Air vents
5. LED worklight
6. Drive shaft
7. Flange bolt
SELECTING THE APPLICATION ACCESSORY
WARNING:
If a part is damaged or missing, do not connect the appliance to the mains, or switch it on, until you have
replaced the damaged or missing part. Failure to observe these instructions can lead to serious injury.

ACCESSORIES

Semi-circular rasp
Delta rasp
Scraper tool
Semi-circular saw blade
Straight saw blade
Delta Velcro sanding base plate for
holding Velcro backed sandpaper
MATERIALS
For removal of joint fillers in marble, tiles etc.
For removing hardened adhesives, tile adhesives, wood,
masonry
For removing and scraping off carpet, tile and adhesive
residues, old coats of paint
For cutting wood, plastics, plasterboard, non ferrous
metals, thin sheet metals
Cutting wood, plastics, plasterboard, soft metals and other
materials
Untreated or painted wood, plaster and other surfaces
depending on the sandpaper grain
81 Original instruction