Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Use
The hot-air stripper gun is a universal tool that is intended for the thermal pro-
cessing of various materials.
Areas of application:
•
Removing / burning off paint and lacquer from solid substrates
•
Warming and drying of surface coating material
•
Removal of mould spores
•
Forming and welding of plastic parts
•
Heating of heat shrink tubing, loosening of cable connections
•
Soldering and tinning, thawing of water pipes.
The hot-air stripper gun allows an electronic temperature setting of 50 °C -
650 °C at an air flow rate of 250 to 500 l/min.
Double insulation
Our appliances are designed for maximum user safety in compliance with
European regulations (EN standards). Machines with double insulation always
have international kite marks. The machines do not need to be earthed. A
two-wire cable is sufficient. The machines are suppressed in line with EN
55014.
Safety and accident prevention
Before starting to use this machine please read through the entire operating
instructions carefully, follow the safety instructions contained in this manual,
and observe the general safety precautions for power tools. If there are any
ambiguities, please contact us immediately. Do not use the machine if you are
uncertain of any aspect. By starting to use the machine you confirm that you
have read and fully understood this manual.
The device possesses a voltage range which can pose an electrical hazard to
humans and animals. It should only be unscrewed and / or disassembled by
authorised personnel.
Likewise, maintenance and repair work should only be performed by STORCH,
or by service stations authorised by STORCH. This device is operated at the
sole responsibility and risk of the purchaser / user.
Original instruction
44
Werbung
Kapitel
Inhaltsverzeichnis
