Hama WFC-970 Bedienungsanleitung Seite 12

• If the unit is able to receive the Meteotime signal success-
fully, the Meteotime icon
of display. Otherwise, the Meteotime will be
1
4
1. means it successfully receive today`s weather
information. Otherwise, it will be
2. means it successfully receive weather information of
one-day-after. Otherwise, it will be
3. means it successfully receive tomorrow weather
information. Otherwise, it will be
4. means it is able to receive the Meotime weather signal.
Otherwise, it will be
5. means it successfully receive weather information of
two-day-after. Otherwise, it will be
In the event the Meteotime icon change to
there are potential sources of interference on the unit. The
sources of interference may come from the electronics
equipment such as TV-set, computers, household machines
etc. It may also be due to lots of concrete, metal parts and
electrical equipment in the building. It may also be due to
your living area if it is very far away from the Radio-controlled
clock tower.
You are able to use the TEST function to look for a better
location
• Press TEST button, SCAN is shown in the Information
window
• pick the unit to find a good location.
12
is appeared in the second row
.
3
.
.
.
.
.
, that means
• flashing: the test is running and the Meteotime signal
reception is good. You are able to leave the device in this
position.
signal reception is poor. You need to keep on looking for a
2
better location.
• The test lasted for around 1 minute. You can restart the test
with the [TEST] key at any time, and also discontinue the
test by press the TEST key.
• SCAN A: the signal strength will be represented from 0
(very bad) to 9 (very good).
• After inserting the batteries, the weather station searches
5
for the radio controlled time signal as well as the Meteo-
Time signal. After it has successfully received the Meteo-
Time signal, the display shows in the information window
the default city
• You are able to press [SET] to switch from the display of the
city to date, weekday alarm, single alarm and pre-alarm.
SELCET THE COUNTRY AND THE CITIES
• Press and hold [SET] for 3 seconds, in the information
window
[ ] to select the country. For example: If you see in the
information window
selected "Germany".
• Press [SET] to confirm the country. Assuming you have
selected Germany, then the information window will show
.
• Then, press [
name will be shown in the information window. Example:
Press now [SET] to accept the setting. From now on, the
selected city will now be shown in the information window.
ACTIVATE FAFOURITES
Once you have set your city as described above, you may
select more cities for easy access. Instead of terminating the
setting with the key [SET], you continue as follows:
• If "Frankfurt am Main" is your selection as one of your
favorite cities, then press [TEST
shown on top of your selected city, and it will be stored into
your personal memory list.
• Now you may press [
same country, and then press [TEST
flashing: the test is running and the Meteotime
.
is shown, and then press [
, that means you have
] or [ ] to select the city, and the city
means the city of "Frankfurt am Main"
] to confirm. A
] or [ ] to select more cities in the
] or
will be
] to confirm.